Procam CNC Wood Routers for Cabinet makers and Nested Base Manufacture.

At Procam, we have found that our best sales people are our customers.  They are also our greatest source of ideas for continual product innovation.  And we are not afraid to say who our customers are!  We work very hard to make sure they are very happy with our machines, the accompanying software, training, phone back up support, technical backup service, and supply of router bits. Please contact anyone listed in our customer list below.  We know you will be impressed.

---

Centurion Cabinets
Malaga
Western Australia
08 9249 5170


Paul and Colin have been using their Procam CNC and KCDw software for the last three years. Theirs is another success story where from cutting everything by hand on a panel saw to having everything cut perfectly by an automatic parametric process.

---

Colesso Kitchens
Silkwood
Queensland
07 4065 2109  

Morris bought a secondhand Procam from a carpentry shop in Cairns some 12 months ago. The machine, on arrival in Silkwood, was in a state of dis-repair and had had a rough life. Procam sent a technician to refurbish the machine and install KCDw software. Morris is now happily cutting out kitchens at a rate he never believed was possible.

---

  

Furniture Concepts Brisbane Queensland

(07) 3277 4139 Speak to Franz Braun

Furniture Concepts has been using a Procam CNC Router for over four years. The Owner Mr Franz Braun comments: "The first job we ran through the Procam CNC saved us over $3000.00 in material by nesting the parts and being able to cut curved shapes. We have dramatically increased production and turnover.  We very much appreciate the training we received, and ongoing backup support over the phone while we got up to speed with our new router. "

Thanks Again

Franz Braun

Franz has gone on to purchase a second Procam CNC router to compliment his huge manufacturing plant.

---

Eboniste Interiors

Perth Western Australia

Ph +61 8 9434 9777 

"The training I received was comprehensive and fun. The time you have put into procedural manuals makes for a constant source of reference. The machine is running like a dream and we have never pushed through so much work in such a short time despite being 2 staff members down. I would like to thank you very much and would highly recommend you to anyone who is looking for a CNC.

Once again I thank you for all your efforts and the best service I have had since arriving in Australia some 16 years ago."

David Hochwald-Jones

---

The Kitchen Factory
www.thekitchenfactory.com.au

Melbourne Australia

Ph +61 3 954 72240

Director and operator of the Kitchen Factory Sonny Salahi says " Without a Procam Nested Based Production Centre I would still be struggling to get the work out of the door on time. Now I can guarantee delivery times to all of my customers every time. Since we purchased this machine we have had exceptional tech support and trouble free operation"

---

AJ Kitchens
Warners Bay
NSW Australia
Ph 0412650339

Robert bought a Procam E2412 nested based production machine in order to give himself more free time to Run his business. Robert was spending to much time making cabinets and not enough time on the day-to-day running of his business. Since installing the Procam he has had more than enough time on his hands and has moved into other ventures.










Procam CNC Director Doug Bateson
with Robert Smee from AJ Kitchens.

---

Campbells Kitchens
Townsville
07 47782666

One of Townsvilles most dynamic cabinet makers invested in a Procam CNC router some time ago. He purchased the machine after exhaustive investigation into all the possible CNC machines available.

Says Geff Campbell, director of Campbells Kitchens "We have had excelent service from Procam and the machine runs faultlessly day in and day out. One of the advantages we have is that we purchased not only the machine, but the KCDw design software from Procam. This means that the integration of the software was seamless and the training was comprehensive. We have since gone on to purchase a further 3 seats of KCDw and a second Procam CNC machine to keep up with the work load created by embracing technology. " Click here for a Testimonial from Campbells kitchens.

---

Tudor Cabinets
Delamarta Rd
Wangara
08 93095104

Gary and Niel are a father and son team who recently decided that the only way to save their sanity was to go with a CNC router. They decided to purchase a Procam over the other machines available because of the level of commitment made by Procam to satisfy all of their customers. Gary and Niel also purchased KCDw software from Procam. "The combination of Procam and KCDw has turned our business around and the insurmountable backlog of orders has dwindled down to being a small mountain.

---

Yanakis and Sons
54 Attwell St
Landsdale
Western Australia
08 9309 2535

Tony and George Yanakis decided to purchase a Procam CNC Router after many months of deliberation.
They purchased their machine along with KCDw Cabinet Design Software.
According to George, if they had to manufacture cabinets without their Procam CNC Router they would close the doors and go home. they don't know how they managed without a Procam CNC.

---

Vision Clad Australia
Malaga
Western Australia
Ph 08 9248 7881

Managing Director Giuliano Dichiera was instrumental in the purchase of a Procam CNC router for the panel processing of Alucabond panels in their Malaga factory. "Now we can not only cut panels to size but we cut all of the bend lines as well as pre drilling all of our mounting holes. We are so happy with our Procam CNC we are planing the installation of a second machine," says Giuliano. 

---

Shop Fitting Services
Kingston Queensland
07 3209 3322

Production Manager Julian says "The performance and reliability of our two  Procam CNC routers has enabled us to finish the most complicated jobs in record time. The quality and accuracy of cut means we can quote and win jobs we would have never even considered before."

---

Aljay Cabinets
Brendale
Queensland
07 3889 7977

Aljay Cabinets have been using Procam CNC along with KCDw software for almost a year. "The difference this has made to the kitchen cabinet manufacture is unbelievable" says Paul the factory Foreman. "Every component is accurately machined with every hole, slot or rebate in exactly the right place. Even the edgebanding detail is printed right on the part"